I give those with gas grills a lot of grief.  “Why not just haul your stove out onto the deck to grill,” I often say.  I make no attempts to hide the fact that I am a charcoal purist, but I understand that some people like the ease and convenience of a gas grill.  Other charcoal purists, charcoal snob if you will, will say that gas grills just aren’t all that versatile.  They are good for steaks, burgers, brats, but that’s about it.  They can only do hot and fast grilling.  And while they are pretty much designed for hot and fast grilling, it doesn’t mean they can’t be used for other things.

So for you gas grill owners out there, this post is for you.   I will show you how to turn your outdoor stove into a smoker.  That’s right.  Low and slow on a gas grill….

First off, whenever I grill chicken I brine them before hand.  Always.  The results are almost magical.  Anyone can make a good chicken but brining takes it to a whole other level.  What is brining?  It’s dropping meat into a salt water solution for a period of time, usually 12 hours or so.  More on the solution itself later.    The thought of adding salt to meat, other than right before it goes on the grill, always made me think of drying the meat out.  But there is legit science behind brining.

Brining performs three essential functions.  First, the salt partially dissolves muscle filaments.  Muscle filaments contract when cooking and make meat tough.  Why is a well done steak not as tender as a medium rare steak?  More contraction of the muscle filaments.  If they are partially dissolved they cannot contract as much, thus the salt makes the meat more tender.

Second, the salt has an impact on the proteins in the meat.  It allows for the meat to absorb and retain more fluid.  The meat is going to lose fluid in the cooking process but if you can somehow add more before you cook then you will cut down on the overall fluid loss at the end thus the meat will be juicier.

Now you can stop here and just use a salt water solution to brine the meat, but why not go an extra step to the third thing a brine can do which is introduce flavors into the meat as well.  I just said that the brine allows the meat to absorb and retain more moisture.  Now where will meat completely submerged in liquid get that extra moisture?  From the water around it.  By adding flavor to that water you will add flavor to the meat as it draws the moisture in.

What do people always wish for when cooking?  Meat that is moist, tender and flavorful.  This gives you a leg up on all three.  Are you sold on brining yet?  If not, just try it once.  I guarantee you will be then.

So how does one create a brine?  Simple, fill a container with water, salt, and flavorizers.  This is not rocket science or chemistry.  Basically stick to the 1 cup of salt per gallon of liquid rule and then add whatever you like to add flavor.  For me that usually involves some sort of fruit, some sugars, garlic and/or onion and some acidic soda.  For fruit I have used citric fruits like oranges, lemons, limes, but I have also used apples and peaches.  The riper the better here.  For sugars I have used maple syrup, white sugar, brown sugar, turbinado sugar, and molasses.  For soda I have used white and dark sodas.

One quick note, not all salts are the same.  Table salt  weighs about 10 ounces per cup whereas kosher salt can weigh in anywhere between 5-8 ounces.  Some brands are heavier, some lighter.  If you go with Kosher salt you want to kick up the amount.  Regular table salt go with the 1 cup rule.  Diamond Crystal Kosher Salt, you want to be closer to two cups and Morton’s Kosher, look to be around 1.5 cups per gallon of fluid.

For this brine I was putting the chickens in a cooler so I needed quite a lot of water to submerge all three chickens.  I estimated the water to be about 3 gallons.  The ingredients are as follows:

• 3 gallons of water
• 3 cups table salt
• 5 peaches – sliced into bite size chunks
• 2 cans of cola
• 1/2 large onion – coarse chopped (you could use more here, it was just what I had left over in the fridge)
• 18 cloves of garlic – coarse chopped
• 1 cup brown sugar
• 1/2 cup maple syrup

Combine all the ingredients into a sterilized cooler and stir quite a bit to get the salt to dissolve then drop in the chickens:

Normally I can do two chickens in a large pot and put it in the fridge overnight but I could not get all three of the chickens in my pot.  Hence the cooler.  Now I need to make sure that the whole concoction stays cold overnight.  This seven pound bag of ice did the trick:

The next day be sure to rinse the chickens when you remove them from the brine otherwise they can be too salty.

I decided to rotisserize these chickens because I was going for low maintenance.  If I did them indirect I would have the chickens on one side and the heat on the other and with three I would likely be repositioning multiple times as the one closest to the fire cooked faster.  This way the rotisserie keeps the chickens moving for me.  You can most definitely do them indirect if you do not have a rotisserie, just expect a little more maintenance.

Couple of tips about rotisserie grilling chickens.  First, use bakers twine and tie the legs and wings in tight to the bodies or the appendages will cook fast and burn.  Second, when doing three chickens, each one will require a rotisserie fork to keep it rotating along with the spit.  And third, when doing three chickens, put the smallest bird in the middle.  The other two will insulate the bird and slow down the cooking of it to help all three get done at the same time.

The chickens below were rinsed, patted dry, put on the spit (with a rotisserie fork in each) tied off and dusted with granulated garlic:

This grill has long front, middle and back burners that run the entire width of the grill.  I just turned on the front and the back.  You may need to adjust accordingly based on your burner configuration or if you are going indirect.

Now to the smoke.  How do you smoke on a gas grill without making a huge mess?  There are all kinds of after market wood tins or chip trays that you can buy to hold the wood and keep the ash contained but I say skip that and buy yourself some chips, yeah, I said chips, and some tin foil:

Those apricot chips are not soaked.  Just a couple handfuls on a sheet of tin foil.  In the pic above I only used one handful.  It only smoked for about 30 minutes so I upped it to two handfuls when I made the other two.  Now wad up the foil into a ball and poke holes into the top of the ball:

Now off to the grill.  Put the ball directly on the flames if you can or in the hottest location if not.  In this case there was more room between the spit and the front than the spit and the back of the grill.  So I turned the front burner to high and the back to medium.  I was looking to hit 400 for the first 30 minutes so this works perfectly.  Here is that foil ball on the hot burner after a few minutes.  It takes a few minutes because the foil insulates the chips from the heat:

Wait another few minutes, close the lid and now your gas grill is a smoker:

I wound up using three foil balls throughout the process.  The first one with only one handful of chips only smoked for about 30 minutes.  The other two went for at least 45.  When one smoke ball is done remove it and replace with another one.  Since I was doing chicken here, I only used one at a time.  Too much smoke can overpower chicken.  But if you were doing say ribs or a loin on a gas grill by all means use two or even three foil balls at a time to produce extra smoke.

After 30 minutes the grill was not producing anymore smoke so I lifted the lid to check my chicken and replace the smoke ball. The chicken skin had browned nicely and tightened up a bit, so I replaced the foil ball with a fresh one and proceeded to brush on my garlic butter sauce:

Wait.  Garlic butter sauce?  Did I forget to mention that?  Oops.  I took about a dozen cloves of garlic and plopped them in one of those little coffee grinders.  This one had never been used for coffee.  It’s just used to grind up herbs and garlic.  I basically pureed the garlic and then added the garlic to a pot that I had melted four sticks of sweet butter in.  Once the skin had browned a bit and tightened up I braised the chickens with the garlic butter sauce using a pastry brush every 30 minutes or so.

After I closed the lid I dropped the front burner down to medium to try to get the temp down to 300.

Here we have another basting session after about an hour on the grill:

Another 45 minutes later (total time so far about one hour and 45 minutes) and these are looking ready to come off the grill.

Some of the other items were taking too long so I dropped the temp to just under 200 for another 30 minutes or so.  You want to cook these till the breast is about 160 degrees.  So stop the rotisserie and shove a meat thermometer into the breast.  Pull them from the grill and let them rest for 5-10 minutes and they should continue to cook until they hit the FDA recommended 165.  If you don’t want to keep poking the bird with a thermometer (something I do not recommend as you will lose a lot of juice that way), look for the juices naturally running out of the birds as they go around.  If the juices are clear all the way around on all three they are done.  Or buy chickens with those little popping thermometers already inserted into the breasts.

Here we have the finished product:

Juicy enough for you?  This was the hit of Father’s day.  A must try for any Grillin Fool!!!

If you have any questions about the above dish please feel free to comment below or email me at Scott@GrillinFools.com.

Click here for other chicken recipes done by the Grillin Fools.

Also, you can follow the Grillin Fools on Facebook and post your own grillin pictures.

The roast was caught on sale at a local grocer and as you can see is ‘netted’. Occasionally this is offered in half at sale pricing and you could purchase and tie together with butcher twine yourself and save a bit of cash.

Ingredients: Pork Roast, Garlic Cloves (sliced thin), sliced Red Onion, and KC Sweet and Smoky Rub (courtesy Master Raichlen).

Prep: Once the garlic and onion were sliced and the rod inserted I then placed the garlic and onion in between the pieces of roast **Editors note – as you can see below he left the garlic and onion slices sticking out in order to show where he was able to insert them between the two roasts. After the shot was taken he stuffed them all the way into the space between the two roasts.**

And then sprinkled rub liberally all over the roast:

Grill: Stainless Steel Barrel fabricated circa 1970 by G-fool’s Grandpa Russ. Russ is no longer with us but his memory lives on each time we utilize the grill he made and passed on to G-fool’s Pappy ( to be inherited by G-fool when Pappy moves on ). Many slabs of ribs were enjoyed over the years grilled at his lakeside home. We know he would be proud to see the grill still in use and treasured by us:

Coals were prepared and a simple drip pan created from aluminum foil was placed under the roast. I guess this achieves sort of a semi-indirect method:

Smoking Wood: For this one I discovered I was out of apple chips which I normally use (good prep eh?) but decided to use a blend of soaked wood chips I had consisting of sassafras, hickory, wild cherry, and apple. The flavor was quite tasty but I still prefer apple or cherry alone. Here is the loin on the rotisserie in the grill:

Soaked wood chips were added and the lid went down. I checked it about every 30 mins. to add additional charcoal and wood chips. This left significant time to enjoy a glass or two of a nice everyday white wine I’d recently found—Wine 4 Chillin’—at World Market. Believe it or not it was a box wine and wasn’t’ bad at all. They also offer a red blend—Wine 4 Grillin’—which is really nice (we had this one super Bowl Sunday). I’ve often been a fan of ‘premium’ box wines and I’ve had many disagreements with G-fool about them but he drank his share Super Bowl Sunday. **Editor’s note – thanks for pointing that out dad. I’m so embarrassed**

If you’re looking for a decent wine for an outdoor event with a group and looking to keep costs down they are a great alternative. These wines will be my everyday wines at the beach on vacation this year. The portability (4 bottle equivalent per box) is an important factor. I used to haul 3-4 cases of bottles each trip for the 8-10 of us that go and that really filled up the vehicle. Some others I’ve tried that are recommended are Black Box, Hardy’s, and Trove but just remember all box wines are not created equal. Expect to pay $15-22 per box—less than that usually indicates inferior quality in my estimation (just my opinion explore for yourself).

Cooking time: An hour and 15 to and hour and a half regardless of roast size as thickness is usually about the same. I don’t use a fancy-schmancy thermometer because I know it’s what works after many efforts over the years. The roast will arrive at the plate juicy and flavorful, not dried out and tough. Hint: spray rotisserie rod with cooking spray before using to aid in cleaning later. An electrical outlet is required or proper extension cord to reach your outdoor grill. ** Editors note – many modern rotisseries are battery operated**

30 minutes in:

60 minutes in:

Ready to pull from the grill:

Roast was allowed to rest ( foil-covered to keep warmth in ) for about 15 minutes prior to carving. Cut to desired thickness for dinner serving. I usually leave remaining portion intact and slice it thin for sandwiches later or chunks for pork hash. We ultimately produced 4 meals from this roast ( depending on number of diners ). Two adults and two kids initially were fed and the remainder provided 2 batches of pork hash ( a simple recipe to follow ) and enough to slice thin for a couple of hot pork sandwiches.

And here we have the money shot:

I was going to wrap the roast in bacon but after a near heart attack from the Bacon Explosion I decided to forego that idea and stay traditional.

Pork Hash Recipe: This would be a carryover from my youth when my folks were trying to stretch their food budget. It’s very simple. Boil a few potatoes (peeled and sliced into chunks) for 10-12 minutes till fork tender. Drain water and place in a warm skillet with a few dabs of heated bacon grease (pork fat does still rule) **Editor’s note – this from the guy who decided against wrapping the roast in bacon but uses bacon grease to warm the pork up** and grate fresh pepper over them. Fry the potatoes til they gain that special crispness on the outside then add pork (cut into chunks or cubes) and a cup or so of diced onion. Fry together till all is browned and serve (salt to taste). If the bacon grease is not an option for you olive oil can be substituted. This simple creation remains one of my all-time favorites.

Pork Sandwiches: This is REALLY simple. Slice remaining pork into thin slices, drop into skillet with a bit of butter or margarine, and heat till edges begin to brown. Serve on bread with your favorite condiment ( I like a little salt, pepper, and mayo on mine ).

There you have it. G-fool’s Pappy’s first solo effort.

**Editor’s note – and a fine effort it was**

As usual, if you have any questions about this recipe, please email me at Greg@GrillinFools.com or simply leave a comment below.

If you are interested in other pork dishes click here.

Also, you can follow the Grillin Fools on Facebook and post your own grillin pictures.